SS Sheet Thickness Chart, Sheet Metal Thickness Chart, Stainless Steel Sheet Thickness Chart, Stainless Steel Sheet Thickness, 304 Stainless Steel Thickness, Aluminum Sheet Thickness, 24 Gauge Thickness in MM, Sheet Metal Gauge Thickness Chart, Sheet Metal Thickness MM.
Steel sheets come in a wide range of thicknesses, depending on the intended use and application. In general, the thickness of a steel sheet can range from as thin as 0.4 mm (or 0.0157 inches) up to several centimeters (or inches) thick.
Common thicknesses for steel sheets used in various industries include:
Automotive industry: 0.7 mm to 1.5 mm
Construction industry: 0.5 mm to 3 mm
Manufacturing industry: 0.5 mm to 10 mm
It's important to note that the thickness of a steel sheet is typically specified by the gauge measurement system, rather than by actual thickness. The gauge measurement system assigns a numerical value to the thickness of a sheet, with a higher number indicating a thinner sheet. For example, a 22-gauge steel sheet is thinner than an 18-gauge steel sheet. The conversion from gauge to thickness in millimeters or inches can vary depending on the type of steel and the gauge system used.
Steel Plate Thickness MM, Steel Plate Thickness, Nickel Plate Thickness, Aluminum Sheet Thickness Chart, Sheet Thickness Chart, Sheet Metal Standard Thickness, Checker Plate Thickness Chart, Standard Sheet Metal Thickness MM, Aluminum Gauge Thickness, Mild Steel Sheet Thickness, Sheet Metal Thickness Range, 14 Gauge Sheet Metal, Steel Sheet Thickness Chart.
Sheet Thickness Chart
Gauge (ga) | Steel Thickness (in.) | Steel Thickness (mm) | Aluminum Thickness (in.) | Aluminum Thickness (mm) |
3 | 0.2391 | 6.07 | 0.2294 | 5.83 |
4 | 0.2242 | 5.69 | 0.2043 | 5.19 |
5 | 0.2092 | 5.31 | 0.1819 | 4.62 |
6 | 0.1943 | 4.94 | 0.162 | 4.11 |
7 | 0.1793 | 4.55 | 0.1443 | 3.67 |
8 | 0.1644 | 4.18 | 0.1285 | 3.26 |
9 | 0.1495 | 3.80 | 0.1144 | 2.91 |
10 | 0.1345 | 3.42 | 0.1019 | 2.59 |
11 | 0.1196 | 3.04 | 0.0907 | 2.30 |
12 | 0.1046 | 2.66 | 0.0808 | 2.05 |
13 | 0.0897 | 2.28 | 0.072 | 1.83 |
14 | 0.0747 | 1.90 | 0.0641 | 1.63 |
15 | 0.0673 | 1.71 | 0.0571 | 1.45 |
16 | 0.0598 | 1.52 | 0.0508 | 1.29 |
17 | 0.0538 | 1.37 | 0.0453 | 1.15 |
18 | 0.0478 | 1.21 | 0.0403 | 1.02 |
19 | 0.0418 | 1.06 | 0.0359 | 0.91 |
20 | 0.0359 | 0.91 | 0.032 | 0.81 |
21 | 0.0329 | 0.84 | 0.0285 | 0.72 |
22 | 0.0299 | 0.76 | 0.0253 | 0.64 |
23 | 0.0269 | 0.68 | 0.0226 | 0.57 |
24 | 0.0239 | 0.61 | 0.0201 | 0.51 |
25 | 0.0209 | 0.53 | 0.0179 | 0.45 |
26 | 0.0179 | 0.45 | 0.0159 | 0.40 |
27 | 0.0164 | 0.42 | 0.0142 | 0.36 |
28 | 0.0149 | 0.38 | 0.0126 | 0.32 |
29 | 0.0135 | 0.34 | 0.0113 | 0.29 |
30 | 0.012 | 0.30 | 0.01 | 0.25 |
31 | 0.0105 | 0.27 | 0.0089 | 0.23 |
32 | 0.0097 | 0.25 | 0.008 | 0.20 |
33 | 0.009 | 0.23 | 0.0071 | 0.18 |
34 | 0.0082 | 0.21 | 0.0063 | 0.16 |
35 | 0.0075 | 0.19 | 0.0056 | 0.14 |
36 | 0.0067 | 0.17 | – | – |
Plate Thickness Chart
Gauge | LB/Sq. Ft. | LB/Sq In. | Plate Gauge Tolerance | ||
72″ Wide | 96″ Wide | ||||
3/16 | 0.1875 | 8.579 | 0.05958 | +.045″ -.010″ | +.050″ -.010″ |
7/32 | 0.2187 | 9.870 | 0.06854 | ||
1/4 | 0.2500 | 11.162 | 0.07750 | ||
5/16 | 0.3125 | 13.746 | 0.09546 | ||
3/8 | 0.3750 | 16.496 | 0.11456 | +.055″ -.010″ | +.060″ -.010″ |
7/16 | 0.4375 | 19.080 | 0.13250 | ||
1/2 | 0.5000 | 21.633 | 0.15044 | ||
9/16 | 0.5625 | 24.247 | 0.16838 | ||
5/8 | 0.6250 | 26.831 | 0.18633 | ||
11/16 | 0.6875 | 29.415 | 0.20427 | ||
3/4 | 0.7500 | 32.123 | 0.22308 | +.060″ -.010″ | +.065″ -.010″ |
13/16 | 0.8125 | 34.707 | 0.24102 | ||
7/8 | 0.8750 | 37.291 | 0.25897 | ||
15/16 | 0.9375 | 39.875 | 0.27691 | ||
1 | 1.0000 | 42.665 | 0.29628 | +.070″ -.010″ | +.075 -.010″ |
1-1/8 | 1.1250 | 47.833 | 0.33217 | ||
1-1/4 | 1.2500 | 53.001 | 0.36806 | ||
1-3/8 | 1.3750 | 58.169 | 0.40395 | ||
1-1/2 | 1.5000 | 63.337 | 0.43984 | ||
1-3/4 | 1.7500 | 73.672 | 0.51161 | ||
2 | 2.0000 | 84.008 | 0.58339 | +.125″ -.010″ | +.150″ -.010″ |
2-1/8 | 2.1250 | 89.610 | 0.62229 | ||
2-1/4 | 2.2500 | 94.777 | 0.65817 | ||
2-1/2 | 2.5000 | 105.113 | 0.72995 | ||
2-3/4 | 2.7500 | 115.449 | 0.80173 | ||
3 | 3.0000 | 126.301 | 0.87709 | +.150″ -.010″ | +.160″ -.010″ |
3-1/2 | 3.5000 | 146.972 | 1.02064 | ||
4 | 4.0000 | 168.264 | 1.16850 | +.180″ -.010″ | +.200″ -.010 |
Nashik, Cairo, Aberdeen, Algiers, Ranchi, Manama, Chennai, Hong Kong, Hyderabad, Jeddah, Geoje-si, Visakhapatnam, Colombo, Muscat, Indore, Kuwait City, Gimhae-si, Atyrau, Montreal, Dallas, Karachi, Howrah, Toronto, Vung Tau, Brisbane, Kanpur, Rajkot, New York, Calgary, Ulsan, Chandigarh, Singapore, Busan, Secunderabad, Lahore, Kuala Lumpur, Bangkok, Gurgaon, Jaipur, Hanoi, Milan, Navi Mumbai, Jamshedpur, Kolkata, Jakarta, Rio de Janeiro, New Delhi, Petaling Jaya, Al Khobar, Ahmedabad, Moscow, Istanbul, Houston, Mumbai, Ho Chi Minh City
Qatar, Russia, Philippines, Thailand, United Kingdom, Yemen, Canada, Namibia, Gabon, Chile, Egypt, Mexico, Bolivia, Switzerland, Norway, Czech Republic, Italy, Nigeria, Kenya, Angola, Australia, Nigeria, United Arab Emirates, Brazil, Japan, Lithuania, Romania, Portugal, Netherlands, Kuwait, Sri Lanka, Bhutan, India, Nepal, Bulgaria, Poland, Iran, Singapore, Jordan, China, Ecuador, Sweden, Chile, Lebanon, Finland, Austria, Mongolia, Costa Rica, Hong Kong, France, Peru, Puerto Rico, South Korea, Tunisia, Croatia, Mexico, Tibet, Trinidad & Tobago, Colombia, Libya